| Contact Us

Sample Mounts

The sample mount allows you to place various types of sample for the AFM measurement. It provides easier means to fix and access the sample.

 

Multi Sample Chuck

  • Sample plate to load multiple small samples for automated sequential scanning
  • Up to 16 samples of less than 10 mm × 10 mm, 20 mm thickness each
  • Sample weight: less than 200 g (in total)
 

150-mm Vacuum Sample Chuck

  • Sample size: 2, 4, 6 inch wafers, and up to 10 × 10 mm of arbitrary shape, 20 mm thickness
  • Sample weight: less than 500 g
 

Tilting Sample Chuck

tilting-sample-chuck

  • Sample plate to tilt the sample for sidewall measurements
    - Tilting angle: 10, 15, and 20°
    - Sample size: 20 mm × 20 mm, 2 mm thickness
    - Sample weight: less than 200 g
 

Non-magnetic Sample Holder

  • A sample holder to hold samples on top of the XY scanner using clips
  • Recommended for magnetically sensitive samples and / or configuration
 

Snap-In Sample Chuck

  • Sample chuck to place samples on a repeatable position
  • Positioning repeatability: 5 µm in X and Y direction each
 

Cross-sectional Sample Holder

  • Sample holder to vertically mount a cross-sectioned sample held by a metallic clip
  • Allowable sample thickness: 3 mm max.