-
LeakageCurrent Spincast ULCA Inorganic Moire ThermalProperties CBD Lateral_Force_Microscopy InLiquid SelfAssembly EvatecAG PS_PVAC OpticalWaveguides PinpointPFM block_copolymer Electrical&Electronics SrTiO3 BiasMode FrictionalForceMicroscopy temp Annealed Nickel PyroelectricDetector LiIonBattery Sic TipBiasMode dielectric trench ThermalConductivity Optoelectonics Celebration Floppy SoftSample Hafnium_dioxide OrganicSemiconductor DLaTGS
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm