-
PetruPoni temperature controller AFM YszSubstrate flakes PANI self-assembled_monolayer LiquidCrystal PolycrystallineFerroelectricBCZT Hexylthiophene Tungsten MLCC KPFM OpticalModulator Sic HBN Perovskite polyvinyl acetate WWafer lithography Fiber PvdfBead IRDetector SKPM cannabidiol Steps Grain pinpoint mode LogAmplifier Device self_healing Wonseok Zagreb TungstenThinFilmDeposition Wildtype OxideLayer
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Fe-Nd-B Alloy
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm