-
BFO Polyethylene temperature_control PetruPoni_Institute SRAM Treatment oxide_layer mono_layer PolymerBlend Magnetic Force Microscopy MoirePattern CalciumHydroxide epitaxy Tungsten SingleLayer Oxide rubber aluminum_nitride BCZT CrossSection ScanningSpreadingResistanceMicroscopy Edwin MeltingPoint Anneal Imprint OpticalWaveguide NtuEee MagneticForce Calcium Gold vertical_PFM OpticalModulator temp_control Sadowski Vortex
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm