-
Force-distance fluoroaalkane Fe_film Metal-organicComplex 3-hexylthiophene Nanopattern NusEce Potential Melt Techcomp electrospinning Austenite Edwin Wang Growing Sic Carbon Spain hard_disk_media multi_layer dielectric_trench Polystyrene C_AFM PhaseChange BiasMode DentalProsthesis temperature controller AFM PANI PinpointNanomechanicalMode temp_control Polytetrafluoroethylene Steps INSP PinPointMode RedBloodCell
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Christmas Ball Lithography on Si
Create oxidation layers on bare Si surface using bias mode of lithography.
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area