-
Epoxy ForceVolumeImage Polydimethylsiloxane Thermoplastic_polyurethane StyreneBeads AM_KPFM Conducting Granada Indium_tin_oxide SSRM Dr.JurekSadowski Tungsten_disulfide SiliconeOxide ElectroChemical mechanical property rubber DiffractiveOpticalElements LightEmiting ito_film FrictionalForce Copper piezoelectric force microscopy Carbon Annealed Yeditepe_University SFAs polymeric_arrays DNAProtein HfO2 Leakage Topography Inorganic_Compound Pore lift_mode biocompatible
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co coated surface
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm