-
VortexCore Foil SKPM UTEM ScanningSpreadingResistanceMicroscopy Self-assembledMonolayer StainlessSteel Yeditepe_University Crystal dielectric trench HiVacuum STM Polymer phase_change Plug Temperature Trench LiIonBattery Polyurethane CompactDisk Fe_film NanoLithography Cross-section BismuthVanadate KPFM CuFoil AdhesionForce CalciumHydroxyapatite Switching Protein LightEmiting thermal_conductivity PANI ConductingPolymer Ferroelectric
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
HfO2 into Indium Tin Oxide Film
ITO film on 1% HfO2-doped Yttria-stabilized Zirconia (001) orientation grown by pulsed laser deposition. Surface segregation of HfO2 into ITO film.
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: AC160TS (k=26N/m, f=300kHz))
- Scan Size: 10μm×10μm,5μm×5μm
- Scan Rate: 0.6Hz, 1Hz
- Pixel Size: 256 × 256, 256 x 256
- Scan Mode: Non-contact
- Cantilever: AC160TS (k=26N/m, f=300kHz))
- Scan Size: 10μm×10μm,5μm×5μm
- Scan Rate: 0.6Hz, 1Hz
- Pixel Size: 256 × 256, 256 x 256