-
ReflexLens C_AFM Chemical Vapor Deposition Battery Spain MolecularSelfAssembly Croatia Silicon Polydimethylsiloxane Thermoplastic_polyurethane CaMnO3 Pores BiVO4 SetpointMode LeakageCurrent Adhesive MultiferroicMaterials CarbonNanotube Inorganic_Compound thermoplastic_elastomers ScanningIon-ConductanceMicroscopy Pore STO SingleCrystal MolybdenumDisulfide Wang kelvin probe force microscopy Hysteresys BiasMode CopperFoil Ceramic pinpoint mode Al2O3 molecular_beam TipBiasMode
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Single-crystal SrTiO3(001) after Annealing
Single-crystal SrTiO3(001) after 1h annealing at 1000°C in air. Formation of steps and terraces, and assembly at the nanoscale of SrO and TiO2 chemical terminations.
Scanning Conditions
- System: NX10
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256