-
Flake Change BaTiO3 SSRM Modulus Lift Cancer dielectric_trench Al2O3 YttriaStabilizedZirconia Workfunction MonoLayer lift_mode hard_disk OrganicCompound RedBloodCell CuParticle HighAcpectRatio CrossSection Tape LiquidImaging kelvin probe force microscopy StrontiuTitanate Device Graphite MagneticPhase Ferroelectric Calcite semifluorinated alkane Chrome HighAspect AtomicSteps plastics polyvinyl acetate self_assembly
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Adhesive system
Scanning Conditions
- System: NX10
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256