-
Lift Regensburg Grain Fe_film HDD Annealed Ceramics FrictionalForceMicroscopy Butterfly PatternedSapphireSubstrat NanoLithography Temasek_Lab high_resolution small_scan GaAs C_AFM Wang NCM\ fluorocarbon Cobalt-dopedIronOxide non_contact hard_disk_media Reading Holes MonoLayer Tin disulfide Pyroelectric pulsed_laser_deposition SAM LogAmplifier WS2 temperature_control hard_disk ContactModeDot SFAs
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Lithography on Si substrate
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: ContscPt (k=0.2N/m, f=25kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 1Hz
- Pixel: 1024×512
- Litho. mode: Tip bias mode
- Litho. Tip bias: Black -10V, White 0V