-
Graphite Flake conductive kelvin probe force microscopy Perovskite Protein UnivCollegeLondon ElectrostaticForceMicroscopy biocompatible silicon_oxide bias_mode Polyvinylidene_fluoride Floppy STM Epoxy ForceDistanceSpectroscopy Array TemperatureControllerAFM LaAlO3 Workfunction LightEmission SKPM Ceramic StrontiumTitanate Resistance PtfeFilter Leakage ScratchMode Writing Materials LithiumNiobate TemperatureControlledAFM CancerCell multi_layer Melt
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co/Cr/Pt
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm