-
AtomicSteps gallium_nitride Fiber Iron LithiumNiobate PetruPoni_Institute WPlug exfoliate Pvdf blended polymers Aggregated_molecules AEAPDES HardDiskMedia CrystalGrowing ConductingPolymer ContactMode 2d_materials Boron Optoelectronic STM TCS Memory BCZT Grain CrossSection Electical&Electronics DentalProsthesis Tin sulfide SmalScan Piezoelectric Indium_tin_oxide food single_layer NCM\ tip_bias_mode
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Collagen film phase change by temp
Scanning Conditions
- System: NX10
- Scan Mode: Tapping
- Cantilever: AC160TS
- Scan Size: 20μm×20μm, 1μm×0.5μm
- Scan Rate: 0.3Hz for 20µm×20µm scan, 1Hz for 1µm×0.5µm scan
- Pixel: 512 × 256 for 20µm×20µm scan, 256 × 128 for 1µm×0.5µm scan
- Scan Mode: Tapping
- Cantilever: AC160TS
- Scan Size: 20μm×20μm, 1μm×0.5μm
- Scan Rate: 0.3Hz for 20µm×20µm scan, 1Hz for 1µm×0.5µm scan
- Pixel: 512 × 256 for 20µm×20µm scan, 256 × 128 for 1µm×0.5µm scan