-
Electronics FuelCell Zhi thermal_property Gold UTEM Mosfet Blend Pvdf Oxide epitaxy #Materials Permalloy norganic Tapping suspended_graphene Change Korea SSRM hydrocarbon Defect molecules doped lift_mode SiliconCrystal ScanningThermalMicroscopy Magnets AlkaneFilm Lanthanum_aluminate WS2 Topography dichalcogenide LiquidCell NUSNNI LightEmission
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm