-
MultiferroicMaterials Blend dielectric_trench Annealed Polyvinylidene self-assembly high_resolution INSPParis Scanning_Thermal_Microscopy ShenYang Genetic cross section Sidewall SiWafer Ferroelectric hetero_structure hard_disk OxideLayer exfoliate Permalloy PhthalocyaninePraseodymium ScratchMode PolyStylene Silicon LaAlO3 Electrode Bacterium Oxidation GaAs Roughness AM-KPFM molecular_self_assembly ThermalDetectors PhaseImaging Ceramic
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm